The apple version at 2014 oops... 2041
Showing posts with label Technical. Show all posts
Showing posts with label Technical. Show all posts
Tuesday, September 15, 2015
Monday, September 29, 2014
BOOST YOUR WIFI SIGNAL USING THIS SIMPLE TRICK.
Here is the most easy way to strengthen your WIFI signal using a SODA
Can. This method has been proven to improve Wi-Fi reception from around 2
bars to about 4 on average, varying between 3 and 5.
Give it a go – all you’ve got to waste is a soda can!
Step 1 : Gather the required materials and tools. Soda Can , cutter, Scissor, and adhesive.
Step 2 : Clean the soda can and pull-off its ring.
Step 3 : Cut the end off the beer can where there’s no opening. Do this using the Stanley knife or similar suitable safety knife
.
Step 4 : Cut around the end with the opening almost all the way. Leave a little bit of metal to keep attached the part that will be the base (see the white line in the illustration).
Step 5 : Cut along the middle of the can in a straight line, opposite to the piece of metal attaching the base.
Step 6 : Being careful, open up the middle piece of metal by bending it until it vaguely resembles the shape of a radar dish.
Step 7 : Place the completed Wi-Fi booster on your router. Place it so that the antenna pokes through the opening, and stick the base of the can to the router with a small piece of poster tack or other suitable adhesive. It’s time to test how much your Wi-Fi is now boosted!
Youtube explanation : https://www.youtube.com/watch?feature=player_embedded&v=aUYGb2JtQYA
Thankz to source : interesting-facts.info/2014/09/boost-your-wifi-signal-trick/
Give it a go – all you’ve got to waste is a soda can!
Step 1 : Gather the required materials and tools. Soda Can , cutter, Scissor, and adhesive.
Step 2 : Clean the soda can and pull-off its ring.
Step 3 : Cut the end off the beer can where there’s no opening. Do this using the Stanley knife or similar suitable safety knife
Step 4 : Cut around the end with the opening almost all the way. Leave a little bit of metal to keep attached the part that will be the base (see the white line in the illustration).
Step 5 : Cut along the middle of the can in a straight line, opposite to the piece of metal attaching the base.
Step 6 : Being careful, open up the middle piece of metal by bending it until it vaguely resembles the shape of a radar dish.
Step 7 : Place the completed Wi-Fi booster on your router. Place it so that the antenna pokes through the opening, and stick the base of the can to the router with a small piece of poster tack or other suitable adhesive. It’s time to test how much your Wi-Fi is now boosted!
Youtube explanation : https://www.youtube.com/watch?feature=player_embedded&v=aUYGb2JtQYA
Thankz to source : interesting-facts.info/2014/09/boost-your-wifi-signal-trick/
Subscribe to:
Posts (Atom)